Product Description
16.5" .308 Slim Keymod | LR-308 Free Float Handguard | Lo-Profile
The CTS Ultra-Lite 308 Series Hand Guard system is a revolutionary development in DPMS/SR-25 handguards. It Features the dynamic Vltor style KeyMod system for attachments. Machined of 7071-T6 aluminum, with black hard anodized finish. A full length top rail makes accessories and optics mounting a no-brainer, and the unique design functions with all commercial KeyMod products.
Note: does not fit the high profile DPMS upper.
- 16.5" weighs 0.93 lbs - ID 1.525"/ ID Gas block 1.783" - OD top-bottom 2.08"
- Dimensions, side to side (flat areas) ID 1.51" - OD 1.66"
- Accessory Rail 3" length - weighs 0.16 oz. ea. or 0.5 oz for all 3 installed
Includes:
- .308 8620 Steel Proprietary Barrel Nut
- All mounting hardware
- This is for the DPMS LR-308 Lo Profile Pattern only!
Installation:
- Insert barrel into receiver.
- Use blue loctite on receiver threads (2-3 drops)
- Use our Multi Caliber Armorer Tool or a 1 3/8" crows-foot to tighten to 30-35 lbs
- Install gas block assembly, you may need to notch the barrel nut a few mills...
- Slide the hand-guard over the barrel nut and align top rail
- Align and insert the wedge compression nuts up towards the barrel nut
- Tighten each to 8-10 lbs | Use 1 drop blue loc-tite each
Product Videos
Custom Field
Product Reviews
10 Reviews Hide Reviews Show Reviews
-
308 Rail
I love it. It mounts easily and exactly matches my upper height. Looks great too!
-
doesn't match
The only reason that I did not give this 5 stars, is that the rail is about an eighth on an inch shorter than my Aero upper.
-
16.5 Handguard
Easy installation. proper match to the upper. comfortable feel at range. Quality & price great.
-
Has yet to be put to use, but is obviously high quality.
I haven't installed this yet because I'm still collecting parts however, I can tell by looking at it, it's constructed with precision and is even lighter than the 15" handguard on my other rifle. Additionally it's slimmer than I expected which works for my build. I can't wait to give it a try.
-
Great hand guard for the price!
Great hand guard for the price! Whenever I received mine it was damaged, but I contacted Cobratac and they quickly rectified the issue. The hand guard is light and well machined for something in this price range.
-
COBRATAC Competition 308-Series Handguard
Barrel nut is poor design doesnt use standard Amory wrench or Yankee type pin hole wrench.also dont like shim type That hold the rail to secure to Barrel nut
-
308 HANDGUARD
Friggen awesome!!! worked perfect on my DPMS upper lo-pro pattern. the barrel nut may need to be notched out a smidgen for the gas tube, depending on your gas tube supplier, i had 2 and the 2nd one worked without an dremmeling.. quality build quality finish!
-
My handguard
I like it but will have to use it on another build there is a small difference in hieght and does not match up to my upper
-
308 Handguard
I was not able to use do to the fact that the handguard was low profile. My fault but, Jose made it right. Great customer care. Thank You, Jose
-
Good to go
Install was easy,aligned well, stable and priced right.
