Product Description
The Cobratac Scout M-LOK Series is by design Light weight, Simple and clean. Heavily ported, extremely light and simply conforms to whatever you need. The GEN 2 Scout series hand-guard features an aluminum Proprietary Barrel Nut with unlimited 360 degree indexing capabilities. Need an Armorers tool? This hand-guard is great for customizing your setup in any configuration. We offer an optional ported end cap used in long rifle configurations OR take advantage of it's high clearance OD to shroud your can brakes in PDW, CQB configurations. Guaranteed to fit and mate perfectly with a mil-spec M4 5.56 Nato/.223 upper receiver. Made from industry leading T7 7075 Aluminum Alloy and treated with Military Specification Type 3, MIL-A-8625, black Anodized Finish.
NEED SPARE PARTS?.....
Like This Product Have us build it Custom for you today | SEE THE GUIDE NOW
- T7 7075 Ulta hard, yet light
- Bead Blasted with Type 3, MIL-A-8625, Anodized Finish
- Heavily ported Simple and sleek design
- Proprietary Barrel Nut included with unlimited 360 indexing
- Tighten compression screws to 7-10 lb max, use blue loctite
- Tighten Barrel nut to no more than 20 lbs
INSTALLATION
1. insert barrel into receiver...
2. With the jam nut screwed on but not protruding, hand tighten onto receiver
3. Using an Armorer’s wrench tighten to 25 lbs max and align gas tube index hole
4. Use a barrel shim if you can not get it to align properly (sold separately)
5. Install the gas block assembly
6. Screw the jam nut all the way back until it touches the receiver
7. Screw on the hand guard tube all the way down to desired distance from top rail
8. align top rail and tighten the set screw located on the bottom of the tube (10 Lbs)
9. Tighten the jam nut against the handguard using our multi tool or jam nut tool : (10 lbs)
Length ID Weight
Product Videos
Custom Field
Product Reviews
13 Reviews Hide Reviews Show Reviews
-
COBRATAC Scout Gen-2 M-LOK Series | Free Float Hand Guard Tube
It's light, perfectly designed and quality is legit. I was willing to take a risk with this hand guard on my built SBR because of how affordable it is but I was wrong. I put about 200 rounds through it over the weekend and I didn't have any screws come loose or the hand guard heat up. I wish they had this in a 7" for my next AR pistol build.