D-Stash GEM-4 Ambi Charging Handle with Gas Exhaust Mitigation | Black AR 15 .223/5.56 (UP-0619260)
100% lifetime Satisfaction Warranty
All new for 2020 the D-Stash GEM-4 Gas Exhaust Mitigation Ambidextrous Charging handle for all AR-15 upper receivers. The D-Stash Charging Handle is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its fully independent ambidextrous design allows for seamless operation from either side of the weapon, it aims to alleviate some of the problems with MIL-SPEC Charging handles, without adding excessive weight. The Ambi levers are dual contoured similar to that of the charging handle of an M14, where not only the x-axis but also the y-axis receive radius cuts as well as groves for a grippy thumb placement. The handling surface of the lever is also grove cut, adding a textured grip aiding to the use when operating with gloves. The heightened rear lip of the Stash Handle aids in mitigating gas blow back to the shooter when shooting with short barreled and suppressed weapon systems. All parts are then Type 3 Hardcoat anodized. The D-Stash GEM-4 releases cleanly and easily and is as smooth as butter. Looks great on any setup and without any extra bits, levers, pins or such sticking out.
The GEM-4 Technology Features exquisite gas exhaust technology, all excess gasses traveling towards the rear of the upper receiver will be diverted via the .136" Gas Exhaust Mitigation Port. No more burned up gunpowder residue to the face with every shot. Specifically designed to mitigate excess gas blowback due to suppressed rigs. All excess gas is ported to the right side on the charging handle and diverted away from the shooters face. Look no further for a high performance "Gas Busting" type of charging handle that will perform well under pressure and keep harmful gas ,dirt, and oil out of your face for a more pleasant shooting experience with much less shooters fatigue.
- Gas Exhaust Mitigation Technology
- Ideal for suppressed and SBR setups
- Tactical Ambi Charging Handle w/ Butterfly Latch
- Precision machined from rugged and lightweight 7075 T-6 aluminum.
- Hard coat type II anodized to prevent wearing of surface
- Anodized : Combat Black
- Assembled in USA
6 Reviews Hide Reviews Show Reviews
for the money i prefer this over the radian and the cmmg that i have and paid way more for. latches are nice and firm, the the gas mitigation is simple and very effective! i highly recommend this product
This handle is heavy duty and saved my ass in competition. the design is great and i can say by experience that it works very well for constant manual cycling! I shoot competitions and have always used a bcm in the past, I tried the bvlack label and during a stage my gas block loosened on the barrel and the rifle did not cycle. I was able to complete the lane by cycling manually over 30 rounds. The forward cant on the lever really helped me get a good grip as I worked to blade the action under pressure. It wasnt my best time but i can say it wasnt my worst!
The charging handle is extremely well designed, great atention to details. Finish is impeccably good. You get the feeling your holding a very solid product. This company seems to have outstanding QC.
I was looking to upgrade the colt charging handle that came stock on my AR. As I’d previously purchased a Black Label trigger for my AR, I was already very impressed with the quality of their products. So, it was an easy decision to purchase one of their new gen 4 handles as a replacement for the stock one. The handle arrived today and was installed on my weapon. Cobratac has done an outstanding job with this charging handle. Very well made, high quality, handle. Fit and finish is flawless. I’m very satisfied with this purchase. worth every penny and my vote for best bang for your buck!
These things are pretty awesome. Arrived ahead of schedule. Works flawlessly. Awesome upgrade to my rifles. Would highly recommend even at full price.This is top notch. when i buy something for my rifle it has to be quality and im glad i tried this black label gen 4 handle
I have a variety of different charging handles in all my AR's. I always thought the Raptor & BCM gunfighter CH's would always be my favorite. But for the money and I paid regular price, I was very happy to be able to get one of these pre release, I love it. The texture on the levers feel great it cycles very smooth, Very well made! The lever are less likely to snag on gear than the super extendd handles and are great for red dots or iron sights and for left or right handed shooters, etc.